QSS
The quick shift system allows for clutch lever-less, electronically-assisted shifting. When the sensor on the shift rod detects the appropriate motion in the shift pedal, engine power output is momentarily adjusted to allow for the gear change to occur.
QSS does not operate when the clutch lever is pulled, therefore normal shifting can be done even when QSS is set to on. Check the QS indicator for current status and usability information.
| QSS usability | Indicator |
| Upshifting OK |  |
| Downshifting OK |  |
| QSS cannot be used |  |
| QSS turned off |  |
Upshifting conditions
- Vehicle speed of at least 20 km/h (12 mi/h)
- Engine speed of at least 2200 r/min
- Accelerating (open throttle)
Downshifting conditions
- Vehicle speed of at least 20 km/h (12 mi/h)
- Engine speed of at least 2000 r/min
- Engine speed sufficiently away from red zone
- Decelerating and throttle fully-closed
- QS
and QS 
can be individually set. - Shifting into or out of neutral must be done using the clutch lever.