General maintenance and lubrication chart

No. ITEM ROUTINE INITIAL ODOMETER READINGS
600 mi
(1000 km)
or
1 month 		4000 mi
(7000 km)
or
6 months 		8000 mi
(13000 km)
or
12 months 		12000 mi
(19000 km)
or
18 months 		16000 mi
(25000 km)
or
24 months 		20000 mi
(31000 km)
or
30 months
1 * Diagnostic system check
  • Perform dynamic inspection using Yamaha diagnostic tool.
  • Check the error codes.
 ✓ ✓ ✓ ✓ ✓ ✓
2 * Air filter element
  • Replace.
 Every 24000 mi (37000 km)
3 Air filter check hose
  • Clean.
 ✓ ✓ ✓ ✓ ✓ ✓
4 * Clutch
  • Check operation.
  • Adjust or replace cable.
 ✓ ✓ ✓ ✓ ✓ ✓
5 * Front brake
  • Check operation, fluid level, and for fluid leakage.
  • Replace brake pads if necessary.
 ✓ ✓ ✓ ✓ ✓ ✓
6 * Rear brake
  • Check operation, fluid level, and for fluid leakage.
  • Replace brake pads if necessary.
 ✓ ✓ ✓ ✓ ✓ ✓
7 * Brake hoses
  • Check for cracks or damage.
  • Check for correct routing and clamping.
 ✓ ✓ ✓ ✓ ✓
  • Replace.
 Every 4 years
8 * Brake fluid
  • Change.
 Every 2 years
9 * Wheels
  • Check runout and for damage.
  • Replace if necessary.
 ✓ ✓ ✓ ✓ ✓
10 * Tires
  • Check tread depth and for damage.
  • Replace if necessary.
  • Check air pressure.
  • Correct if necessary.
 ✓ ✓ ✓ ✓ ✓
11 * Wheel bearings
  • Check bearings for smooth operation.
  • Replace if necessary.
 ✓ ✓ ✓ ✓ ✓
12 * Swingarm pivot bearings
  • Check operation and for excessive play.
 ✓ ✓ ✓ ✓ ✓
  • Moderately repack with lithium-soap-based grease.
 Every 32000 mi (50000 km)
13 Drive chain
  • Check chain slack, alignment and condition.
  • Adjust and lubricate chain with a special O-ring chain lubricant thoroughly.
 Every 600 mi (1000 km) and after washing the motorcycle, riding in the rain or riding in wet areas
14 * Steering bearings
  • Check bearing assemblies for looseness.
 ✓ ✓ ✓ ✓ ✓ ✓
  • Moderately repack with lithium-soap-based grease.
 Every 12000 mi (19000 km)
15 * Chassis fasteners
  • Check all chassis fitting and fasteners.
  • Correct if necessary.
 ✓ ✓ ✓ ✓ ✓
16 Brake lever pivot shaft
  • Apply silicone grease lightly.
 ✓ ✓ ✓ ✓ ✓
17 Brake pedal pivot shaft
  • Apply lithium-soap-based grease lightly.
 ✓ ✓ ✓ ✓ ✓
18 Clutch lever pivot shaft
  • Apply lithium-soap-based grease lightly.
 ✓ ✓ ✓ ✓ ✓
19 Shift pedal pivot shaft
  • Apply lithium-soap-based grease lightly.
 ✓ ✓ ✓ ✓ ✓
20 Sidestand pivot
  • Check operation.
  • Apply molybdenum disulfide grease lightly.
 ✓ ✓ ✓ ✓ ✓
21 * Sidestand switch
  • Check operation and replace if necessary.
 ✓ ✓ ✓ ✓ ✓ ✓
22 * Front fork
  • Check operation and for oil leakage.
  • Replace if necessary.
 ✓ ✓ ✓ ✓ ✓
23 * Shock absorber assembly
  • Check operation and for oil leakage.
  • Replace if necessary.
 ✓ ✓ ✓ ✓ ✓
24 * Rear suspension link pivots
  • Check operation.
  • Correct if necessary.
 ✓ ✓
25 Engine oil
  • Change (warm engine before draining).
 ✓ ✓ ✓ ✓ ✓ ✓
26 Engine oil filter cartridge
  • Replace.
 ✓ ✓ ✓
27 * Cooling system
  • Check hoses for cracks or damage.
  • Replace if necessary.
 ✓ ✓ ✓ ✓ ✓
  • Change coolant.
 ✓
28 * Front and rear brake switches
  • Check operation.
 ✓ ✓ ✓ ✓ ✓ ✓
29 * Control cables
  • Apply Yamaha cable lubricant or other suitable cable lubricant thoroughly.
 ✓ ✓ ✓ ✓ ✓ ✓
30 * Throttle grip
  • Check operation.
  • Check throttle grip free play, and adjust if necessary.
  • Lubricate cable and grip housing.
 ✓ ✓ ✓ ✓ ✓
31 * Lights, signals and switches
  • Check operation.
  • Adjust headlight beam.
 ✓ ✓ ✓ ✓ ✓ ✓
  • Air filter
    • This model uses a disposable oil-coated paper element. This element cannot be cleaned with compressed air, doing so will only damage it.
    • Replace the air filter more frequently if you often ride in the rain or dusty conditions.
  • Hydraulic brake service
    • Regularly check the brake fluid levels. Replenish as necessary.
    • Every two years replace the internal components of the brake master cylinders and calipers, and change the brake fluid.
    • Replace the brake hoses every four years or sooner if cracked or damaged.