Seats

Passenger seat
To remove the passenger seat

  1. Insert the key into the seat lock, and then turn it clockwise.

    ZAU0N783.png
    1. Seat lock
    2. Unlock.

  2. Lift the front of the passenger seat and pull it forward.

To install the passenger seat

  1. With the seat lock key still in the open position (turned clockwise), insert the projection on the rear of the passenger seat into the seat holder as shown, and then push the front of the seat down to lock it in place.

    ZAU0N784.png
    1. Projection
    2. Seat holder

  2. Remove the key.

Rider seat
To remove the rider seat

  1. Remove the passenger seat.

  2. Pull up the corners on the rear of the rider seat, remove the bolts with the hexagon wrench (see page ), and then pull the seat off.

    ZAU0N785.png
    1. Bolt
    ZAU0N786.png
    1. Hexagon wrench
To install the rider seat

  1. Insert the projection into the seat holder as shown, then place the seat in the original position.

    ZAU0N787.png
    1. Projection
    2. Seat holder

  2. Install the bolts with the hexagon wrench.

  3. Insert the hexagon wrench back into its holder.

  4. Install the passenger seat.

    Make sure that the seats are properly secured before riding.