Wheel installation

1. Install the wheel and the nuts.

2. Lower the vehicle so that the wheel is on the ground.

3. Tighten the wheel nuts in a crisscross pattern to the specified torque.

   Do not reverse the rims on your Yamaha Wolverine RMAX4 to widen the track width. Installing wheels improperly increases the risk of wheel failure and accidents.

   Tightening torques:

   Front wheel nut:

   95 N·m (9.5 kgf·m, 70 lb·ft)

   Rear wheel nut:

   95 N·m (9.5 kgf·m, 70 lb·ft)