Headlight beam adjustment

It is advisable to have a Yamaha dealer make this adjustment.

To adjust the headlight beam

  1. Remove the hood. (See page .)

  2. Remove the headlight cover by removing the quick fastener screws.

    ZBU06318.png
    1. Quick fastener screw
    ZBU06319.png
    1. Headlight cover
    2. Quick fastener screw

  3. To raise the beam, turn the headlight beam adjusting bolt in direction (a). To lower the beam, turn the headlight beam adjusting bolt in direction (b).

    ZBU06320.png
    1. Headlight beam adjusting bolt

  4. Place the headlight cover in its original position, and then install the quick fastener screws.

  5. Install the hood.